PICKLEBALL TUTOR SPIN
The Pickleball Tutor Spin may be small, but it sure is mighty! The machine that revolutionized training for pickleball keeps getting better. The Tutor Spin offers both right spin and left spin. Now you have the ability to practice your returns against the most challenging serves. The Tutor Spin is one of the smallest machines on the market - only 12 x 18 inches wide and 20 inches deep, making it almost half the size of other machines. It also weighs only 30 pounds – easy to transport thanks to the tow bar and caster wheels. This machine can hold up to a whopping 125 pickleballs. Shots are customizable: choose from a high lob, a short dink or a quick, direct fire at speeds up to 60 miles per hour.
The Pickleball Tutor Machine is available in battery-powered or AC models. When the battery is fully charged, it can last up to 2-3 hours. Players can program the machine to fire at intervals between 1 and 10 seconds depending on how quick you want your game to be.
The Pickleball Tutor Machine is available in oscillating (battery or AC power). The oscillating model will randomly fire side-to-side shots or you can select the 2-line version to set separate shot locations. The machine can be used with either indoor or outdoor pickleballs.
Note: Non-Oscillating version of this machine is no longer available.
Battery-powered model weighs 30 lbs.
AC powered model weighs 23 lbs.
Measures 12" x 18" x 20"
Speeds up to 60 mph
3 year manufacturer warranty on machine
1 year manufacturer warranty on battery
Made in the USA
Item will be drop shipped from California within 21 days
The USAPA pickleball specifications permit a range in ball diameter (2.854” - 2.992”). If the Pickleball Tutor is used with a mix of both the smaller and larger diameter pickleballs, players may have a varied experience with trajectory. If the machine is set to feed the ball low over the net with the larger diameter ball, the smaller ball may have a lower trajectory, even hitting the top of the net. The distance between the wheels of the machine determine how much pressure is put on the ball and the resulting speed the ball is fed. Therefore, a smaller diameter ball will come out of the machine slightly slower than the larger diameter ball.
Wireless 2-Function Remote ($200.00): Controls ball feed on/off and machine oscillation on/off. The Wireless 2-Function Remote works with oscillating machines only and must be ordered at the time the machine is ordered for configuration by the manufacturer.
2-Line Oscillation (MSRP $200.00): This feature alternates shots between two preset locations on your court. Players can practice forehand and backhand shots in addition to rapid drills or get additional use out of the Tutor by allowing two players to practice at the same time. This option must be ordered at the time machine is ordered for configuration by the manufacturer.
Additional Accessories available (Click on the links below to view these products):
Electronic Elevation Feature ($100.00): A simple electronic switch on the control panel will allow you to control ball trajectory instead of using the standard manual knob which requires loosening and re-tightening. This option must be ordered at the time machine is ordered for configuration by the manufacturer. (If you want this option please put in the notes and it will be billed separately)
External Battery Pack: (MSRP $195.00): External battery pack attaches to the machine through the charging jack and will provide an additional 4-6 hours of run time. Battery pack weighs approximately 12 pounds. (available for purchase separately)
External AC Power Supply (MSRP $125.00): For Battery-Powered models, the External AC Power supply allows you to plug your battery-powered Tutor Plus Machine into a wall outlet. (Battery must have at least partial charge for this accessory to function). (available for purchase separately)
How about offering your club players some great shirts with your very own logo?!
Our club program has been revamped to help make things easier for you and your club members.
We will help you get your design ready for printing and provide a web page for your members to go to for ordering. We'll do a 2 week push at a reduced price for members to get their first shirts and get you going quickly.
Then we will take individual orders on the website and print them as they come in. We will take the orders, and manage the payments.
After initial order, please allow up to two weeks for processing individual shirt orders.
Email us at- email@example.com for more information or to get started.